This beer tower cooler is designed to cool the beer tower on a direct draw type draft beer system. With a direct draw system, the beer keg is stored in a refrigerator or cooler right below the beer tower.
The number one complaint about any direct draw kegerator is that the beer faucet & shank get warm and your first 1/2 glass of beer is always foamy. But the solution is less than 5 minutes away - just install our tower cooler. Our tower cooler works by continuously blowing a small volume of cold air into your beer tower and the cold air keeps your beer shanks and faucets ice cold. A side benefit is that the continuous cold keeps faucet mold and bacteria growth at an absolute minimum.
Our tower cooler features:
Works with any kegerator - home built or store bought.
Works with homebrew or draft beer.
Easy to install - just plug in and you are ready to go.
Uses a tiny 40 mm fan to blow just the right amount of air into your beer tower.
Includes three foot of 1" OD hose to push the cold air up into the beer tower, leaving plenty of room for warmer air to fall back down into the kegerator.
Includes a energy star energy efficient power supply.
Power supply can be unplugged - can be run under the kegerator door gasket or through a hole you carefully drill through your kegerator wall.
Uses less power than a 15 watt night light.
Our beer tower cooler includes everything - no tools need unless you want to (carefully) drill a hole through the side or back of your kegerator tor the power supply cord.
Install is simple with no tools needed:
Unpack the beer tower cooler.
Push the open end of the cooler hose up into your beer tower until it stops.
Use the supplied nylon zip-tie to tie the hose to your beer lines.
Plug the power supply into a wall outlet or extension cord.
Run the thin power cable past the kegerator door and plug into the Beer Tower Cooler.
For a cleaner looking install, you may want to run the power cord through a small hole you drill through the side or back of your kegerator. Be careful to avoid refrigerant lines if you decide to do this.
Note: A beer tower cooler will not solve other issues with your kegerator like incorrect CO2 pressure, short beer line, warm keg or beer faucet / tower cleanliness issues. Your kegerator is a beer delivery system and this tower cooler, like any other, is designed to address one nagging problem. If you install our beer tower cooler or anyone else's or you build & install your own and still have a foaming problam, you have another cause not related to the beer tower getting warm. But once you solve that foaming issue, the problem this beer tower cooler was designed to solve - the issue where the beer tower and beer shank stay warm - will also be solved.
Just $41.95 for a complete Beer Tower Cooler.
USA Customers - Buy your Beer Tower Cooler directly from this web site and receive free Priority Mail shipping - up to a $9 value depending on where you are at in the country.
International Customers - Please see our International Orders page for additional shipping cost to you. Also, orders placed to countries outside of the US, Mexico and Canada will need our International power adapter.
To order, please select the correct power supply for your stir plate then press "Add to Cart".
Non-USA orders must purchase international freight from the International Orders page to cover additional shipping cost.
Wholesale Sales - Any tower cooler wholesale enquiries should be directed to FOXX Equipment.